12-port Full Gigabit Managed Bypass Industrial Ethernet Switch
Introduction:
IES3000 series is industrial 12-port full gigabit managed Bypass Ethernet switch. This product provides gigabit copper port (optional PoE), gigabit SFP slot and 2 Bypass. It adopts rack mounting to meet the requirements of different application scenes.
Network management system supports various network protocols and industrial standards, such as ERPS, STP/RSTP/MSTP ring network protocol, 802.1Q VLAN, QoS, IGMP Static Multicast, LLDP, Port Trunking, Port Mirroring, IPv6 Management, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, 802.1X Authentication, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
There are two independent power supply circuits inside the device, which can ensure that it can operate normally when one fails. DIP switch can achieve restoring factory defaults setting. When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safe city, new energy, aerospace, intelligent manufacturing, military project and other industrial fields.
Specification:
| Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X G.8032 Standard for ERPS IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE 802.1p for Class of Service IEEE 802.1X for 802.1X authentication IEEE 802.1AB for LLDP IEEE 802.3ad for LACP IEEE 802.3af for PoE IEEE 802.3at for PoE+ |
| Management | SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, Port Mirroring, QoS, LLDP, DHCP Server, DHCP Client, File Management, Log Management, Port Statistics, SYSLOG management |
| Security | Classification of User Permissions, Anti-attack Control, ACL, 802.1X Authentication, Port Alarm, Power Supply Alarm, Storm Suppression, SSHD Configuration, Telnet Configuration, HTTPS Configuration |
| Switch Function | 802.1Q Vlan, Static/Dynamic Port Aggregation, Bandwidth Management, Flow Control, Port Isolation |
| Unicast / Multicast | Static Multicast, GMRP, IGMP-Snooping |
| Redundancy Protocol | Ring, STP/RSTP/MSTP |
| Fault Diagnosis | Ping, Traceroute, Port Loopback |
| Time Management | SNTP |
| PoE | Maximum power of PoE port: 30W PoE power supply pin: V+, V+, V- and V- correspond to 1, 2, 3 and 6 |
| Interface | Copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning SFP slot: 1000Base-SFP Flange interface: 2*4 LC-LC, single mode fiber, supports Bypass Console port: CLI command line management port (RS-232), RJ45 Alarm port: 2-pin 5.08mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity is 0.3A/125VAC or 1A/30VDC |
| LED Indicator | Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator |
| Switch Property | Transmission mode: store and forward MAC address: 8K Packet buffer size: 4Mbit Backplane bandwidth: 24G Switch time delay: < 10μs |
| Power Requirement | Power supply range: AC power supply product: 220VAC (100~240VAC); DC power supply product: 48VDC (12~48VDC); PoE product: 48VDC Built-in dual power supply redundancy support 3.0A over-current protection |
| Power Consumption | IES3000-8GT4GS-2BP-2P220: No-load: 5.9W@220VAC Full-load: 11.6W@220VAC |
| Environmental Limit | Operating temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%～95% (no condensation) |
| Physical Characteristic | Housing: IP40 protection, metal Installation: rack mounting Weight: 1.6kg Dimension (W x H x D): 290mm×44mm×174.8mm |
| Industrial Standard | IEC61000-4-2 (ESD, electrostatic discharge), Level 3 Air discharge: ±8kV Contact discharge: ±6kV IEC61000-4-4 (EFT, electrical fast transient), Level 3 Power supply: ±2kV Signal: ±1kV IEC61000-4-5 (Surge), Level 3 Power supply: differential mode±1kV, common mode±2kV Signal: differential mode±1kV, common mode±2kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
| Certification | CE, FCC, RoHS |
Dimension:
Unit:mm
Order Information:
| Available Models | Gigabit Copper Port | Gigabit PoE Port | Gigabit SFP Slot | Fiber Port Bypass | Power Supply |
| IES3000-8GP4GS-2BP-2P48-240W | - | 8 | 4 | 2 | 48VDC |
| IES3000-8GT4GS-2BP-P48P220 | 8 | - | 4 | 2 | 48VDC(12~48VDC), 220VAC(100~240VAC) |
| IES3000-8GT4GS-2BP-2P48 | 8 | - | 4 | 2 | 48VDC(12~48VDC) |
| IES3000-8GT4GS-2BP-2P220 | 8 | - | 4 | 2 | 220VAC(100~240VAC) |
Product Tags:
|
|
IES3000 Managed Bypass Industrial Ethernet Switch Images
|
